Before you call a plumber in Naya Gaon: a 5-minute checklist
What to check and what to tell the plumber so the job takes one visit, not three. Leaks, blocked drains, motors and new fittings.
Updated 17 November 2026
Most plumbing jobs in Naya Gaon are the same handful of problems: a dripping tap, a leaking pipe under the sink, a flush that won’t stop, a motor that runs but fills nothing. Five minutes of checking before you call saves time for both of you.
1. Stop the water first
Find the valve on the line from your overhead tank and close it. If you can’t find one, switch off the motor so the tank doesn’t keep feeding the leak.
2. Take a photo or a 10-second video
Show the leak, the fitting, and if possible the brand name on the tap or flush. Send it on WhatsApp when you call. A good plumber can often tell you what part to bring, or that it’s a two-minute fix.
3. Know which line it is
- Tank line (from the overhead tank): most taps and the flush.
- Direct line / supply line: usually one tap in the kitchen or outside.
- Hot water: from the geyser outlet.
Telling the plumber which one is leaking narrows it down fast.
4. Ask about material before work starts
Ask whether the rate includes parts like the cartridge, pipe, washer or connector. For new fittings, decide the brand together. Keep the bill for anything you buy.
5. Test before they leave
Open the valve, run the tap, flush twice, and look under the sink after a few minutes. It is much easier to fix a small drip while the plumber is still there.
Find a local plumber: plumbers in Naya Gaon.